|2175 Pro-Cut Rear Pink Compound|
CRC "Pro-Cut" 1/12th Pink compound. Soft shore, long-wear, high grip, high rubber content.
CRC "High Roller 38" (HR-38) 1/12th scale wheel
Recently, a trend has been
established to increase the diameter of the
wheel using fillers to artificially increase the effective mounting diameter of
the rim. CRC
has gone a step farther by actually increasing the rim diameter to 38 mm, the
ROAR and IFMAR legal limit. As shown in the pictures, you can see that a
standard 1/12th wheel actually fits inside the new HR-38 wheel, clearly
demonstrating the added diameter.
CRC's new HR-38 rear wheel
is very light weight, with a unique spoke pattern that results from the
placement of the strengthening ribs. The internal ribs not only support the
outer diameter, but they also add strength to the critical 3-hole mounting area,
by providing a web of material on each side of the hole. Older standard wheel
designs leave the
3-hole area un-braced, resulting in a weak area.
The front wheel accepts both flanged and un-flanged bearings. The rear wheel has
mounting offsets that are slightly narrower, allowing the user to custom shim
the rear axle width and track.
CRC "Pro-Cut" 1/12th mounted tires
tires come in all the popular racing compounds. No cheap kit rubber here, all
Pro-Cuts are exotic, long-wear, high-grip rubber mounted on our
new HR-38 rim. Pro-Cuts are trued to race size, no rolling 55 gallon drums. Low
profile racing tires trued to 1.80" front and 1.90" rear. Being mounted on the
new large diameter HR-38 rims, the new Pro-Cuts are low profile race tires.
** Pro-Cuts are light, but strong.
** Pro-Cuts are race ready, right from the
package, no tire grinding needed!
** Pro-Cuts are large diameter, with
** Pro-Cuts are priced the same as current
** Pro-Cuts are legal everywhere.
** The High Roller 38 rim accepts standard