Calandra Racing Concepts, Inc. introduces…

“Clik-Trak” Quick Connect Track Barrier System

For years, Calandra Racing Concepts (CRC) Fasttrak Racing Carpet has been the standard for indoor carpet R/C racing. Now, the company that brings you the finest indoor racing surface releases the finest barrier system for R/C Cars. CRC “Clik-Track”, a revolutionary new track border system that is easy to use, ultra-friendly on R/C cars and a snap to change, allowing quick layout changes.

Unlike most plastic pipe configurations, Clik-trak is made from square pipe, not round. Round PVC pipe has the tendency to “grab” vehicles as cars that touch round pipe typically contact below the equator line of the pipe. Normally, this buries the nose of the car, “sticking” the vehicle to the pipe, causing extensive chassis and body damage. The square profile of CRC’s Clik-Trak allows a car to rub against the barrier without getting stuck. Clik-trak’s smooth, rounded corners eliminates the jagged corners associated with typical lumber based layouts.

Clik-Trak is comprised of straights, 3 different bends or curves and short 1 foot “connector” pieces. The connector pieces slide snugly into the straights and curves, joining them securely. The connectors pieces also feature small “click” connectors buttons on each end, similar to those found on an EZ-Up canopy legs. Every straight and curve has a hole near the end to accept the “clicker” from the connector, just push the clicker down, insert the connector and “click” it into place.

Connector with 2 straights ready to be joined.

Just push down the “Clicker” and join one straight

Smooth, rounded curves and straights connect this way.

Clik-Dots and Clik-Flappers connect this way as well, coming soon….

Push down the next “Clicker” and complete the connection

Done! You are on your way to an easy, car friendly layout!

Clik-Trak features 3 distinct corner pieces, each with a hole to accept the connectors; a 90 degree bend, a sharp bend (more than 90 degrees, 135 degree) and a gentle 45 degree kink. Using these 3 different corner angles, almost any design track circuit can be built. For example, build a challenging road circuit with a gentle sweeper at the end, or a tight course with sharp corners and angled straights or a great oval course using the straights and 90 degree bends in conjunction with Snowbird’s style “Ice”. With Clik-Trak, all of these layouts are possible and only take minutes to setup. Gone are the days of measuring, cutting, building and tearing down circuits comprised of wood, screws and nails. With Clik-Trak, all you need to do is push a button, disconnect, arrange and re-connect to build the layout you wish.

Clik-Trak is available in 2 different Trak-Pak sizes, small and large. The Small Trak-Pak includes enough borders to complete a track of approximately 2300 square feet. The Large Trak-Pak has enough to border to make a good road circuit on a track with the 3360 square feet. This is a rough estimate as lane width and complexity of the circuit effect the amount of pipe needed. Packaged boxes of additional straights, corners and connectors are available separately, so you can add as your needs change.

?

?

?

?

?

Clik-Trak Pricing

?

?

Special 15% discount when combining Fasttrak Racing Carpet order and Clik-Trak order. Also, courtesy discount given to any club or store that has purchased Fasttrak Racing carpet in the past, have your invoice number ready when you call or e-mail.

Available Now! Call to Order 1-315-338-0867