CRC High Roller 38 (HR-38) 1/12th scale wheel - Flex material

Recently, a trend has been established to increase the diameter of the wheel using fillers to artificially increase the effective mounting diameter of the rim. CRC has gone a step farther by actually increasing the rim diameter to 38 mm, the ROAR and IFMAR legal limit. As shown in the pictures, you can see that a standard 1/12th wheel actually fits inside the new HR-38 wheel, clearly demonstrating the added diameter.

CRC's new HR-38 rear wheel is very light weight, with a unique spoke pattern that results from the placement of the strengthening ribs. The internal ribs not only support the outer diameter, but they also add strength to the critical 3-hole mounting area, by providing a web of material on each side of the hole. Older standard wheel designs leave the 3-hole area un-braced, resulting in a weak area.

The front wheel accepts both flanged and un-flanged bearings. The rear wheel has mounting offsets that are slightly narrower, allowing the user to custom shim the rear axle width and track.