3222 – Steering Block – marked for dual Ackerman positions – CRC front end
3222 – Steering Block – marked for dual Ackerman positions – CRC front end
$7.99
New and standard on the CK25AR, this new steering block is for the CRC front end. These new steering blocks (knuckles) come pre-marked for a second steering tie-rod position, a quick run of a 7/64 or 3mm drill will allow mounting of the pivot ball. We only pre-mark the hole position to keep the part stronger for those using the further pick up point. Using the inner position alters the Ackerman angle resulting in more aggressive response. Fits ALL cars with CRC front end and 1/8th inch front axle. Come complete with the upper pivot ball thread-in cap.
In stock
This is a replacement CRC 1/8 Steering Block Set and is stock on the CRC CK25AR. It will fit other CRC vehicles equipped with the Pro Strut front end that use the trailing 1/8th inch front axle. These steering blocks accept the CLN1236 1/8th inch axle, and are available in the trailing axle configuration only. Must use CLN1236 front axle and CLN1248 bearings.
Reviews
There are no reviews yet.