3240 – CRC Pro Strut Front End – 1/12th scale version 1/8th inch front axles
3240 – CRC Pro Strut Front End – 1/12th scale version 1/8th inch front axles
$59.99
Complete Pro-Strut Front End – Fits any car using CRC/ASC type front bolt pattern. (excluding 12R5).
This front end has 1/8th inch axles!
In stock
Team CRC Pro-Strut Front End | |
| The new Pro-Strut front end is very adjustable and easy to build. The metal parts are pre-polished for super smooth movement. The camber and caster are both very easily adjusted. The Pro-Strut F.E. is the only front end that uses pivot-ball technology. The Pro-Strut F.E. also features a wide range of ride-height adjustment. From bare rims to big tires, it is easy to reach legal ride height settings.
|  |
|
The new dual-axle allows the user to flip between inline and trailing axle formats. This is perfect for both oval and road racers.
As always, only the finest materials are used in the making of all Team CRC racing products. Aerospace aluminum and modern plastic composites.
The Pro-Strut also has 1/8th scale style pivot ball camber adjustments. The pre-polished upper pivot ball is inserted through the steering block and the play is adjusted with the slotted plastic insert. The polished ball combined with user-adjustable play makes for a super smooth, slop-free upper suspension point.
|
| The Pro-Strut front end features a lower arm with adjustable pivot ball tension. Just pop the ball in and tighten the clamp screw to get the perfect fit. As the pivot ball and lower arm wear, you can further adjust the tension. |  |
 | Team CRC's Pro-Strut front suspension uses a removable upper cap to facilitate easy caster adjustments. Just remove the screws, slide the shims where you want them and re-install the 2-56 button head screws. The upper cap clamps the hinge pin to keep it from moving. No more fishing the hinge pin through the block and the shims only to lose a bunch of shims during the process. |
| The Pro-Strut front end uses an adjustable thread-in king pin, virtually eliminating the need to shim the front springs. To adjust the pre-load, simply loosen the locking 4-40 set screw and adjust the king pin to the desired pre-load. The adjustable king pin allows the use of different length springs. Simple and effective. | |
|  |
This front end has 1/8th inch axles!
Reviews
There are no reviews yet.