SXT Racing 3.0 Foam & Rubber Tire Traction Compound.

SXT 3.0 was developed to provide superior performance with low odor, for use with both foam and rubber tire class racing.

It also has the ability to rejuvenate old foam tires. When tested on 1 or 2 year old foam tires, after soaking a couple times with SXT 3.0, they can potentially come back to like new condition. Simply run them once and you have race ready tires that before SXT 3, may have been thrown away!

Carpet Foam and Rubber Tire:

Apply SXT 3.0 to clean tires. Typically the entire surface of the rear tires and a portion of the front tires (starting at the inside edge) are coated, depending on traction conditions. Soak time before wiping is also dictated by traction conditions; longer soak = higher, longer lasting traction. Start by soaking the tires for 15 minutes, timing it so that you wipe them 10 minutes before racing.

Asphalt Foam:

Apply SXT 3.0 to tires. Typically the entire surface of the rear tires and a portion of the front tires (starting at the inside edge) are coated, depending on traction conditions. Apply SXT 2.0 on top of SXT 3.0. Soak the tires for 20 to 30 minutes, timing it so that you wipe them 10 minutes before racing. Shorten soaking time if track is high bite.

Recommended Use:

• Foam Tire Carpet
• Rubber Tire Carpet
• Nitro Racing